 |
Products |
 |
|
 |
Personal |
|
|
|
Information |
|
|
|
Currencies |
|
|
|
|
|
|
|
Bestsellers |
|
|
|
| We specialize in modular microcontroller based hardware and software
solutions - specially for the PIC microcontroller from Microchip.
|
| All our products have a
15 day money back
satisfaction guarantee! Products can be purchased online via our site. Simply
add the products you want to your shopping cart, checkout, and within 2 working
days your order will be shipped! Alternatively you can purchase through our worldwide
distributors.
|
|
|
New for 2011, TNT has been added as a shipping method. They provide a Door-to-Door
service, take care of any required customs procedures, and deliver to your door for a low rate starting at $25! For details
click here.
|
|
Check out our current MAY SPECIALS!
- !!! HOT !!!
SBC44UC Single Board Computer with plenty of Digital and Analog inputs/outputs and
USB for USD29.95 in stead of USD49.95!
!!! HOT !!!
- SBC28PC-IR2 and
SBC28PC-IR4 SBC boards
with RS-485, RS-232 and CAN Bus for USD19.95 in stead of USD27.95!
- SBC83IL
SBC with 80 pin PIC and expandable with multiple RS-485, RS-232, 1-Wire and more - now USD29.95 in stead of USD42.95!
- SBC44B SBC board
with RS-232, RTC, EEPROM and more for USD24.95 in stead of USD39.95!
- LCD2S-204FHA Serial 20x4 Character
LCD Module with I2C and SPI ports for USD24.95 in stead of USD39.95!
- LCD2S-162YHY and
LCD2S-162YHA Serial 16x2 Character
LCD Modules with I2C and SPI ports for USD19.95 in stead of USD33.95!
|
Our range of Ethernet boards start at just USD55.00. All boards
are programmed with our free
Modtronix TCP/IP stack
and have a
web based
interface.
All source code is provided for fee, and can be
modified
using free C compiler and MPLAB IDE from Microchip. Custom web pages can be
uploaded
to the board.
Tags
in web pages can be used to monitor inputs.
Accepts
commands
via UDP or HTTP for configuring the board and controlling outputs. For details,
click here.
|
|
Our new
SBC44UC
board has a full speed USB interface, and
is assembled with the PIC18F4550 PIC chip from Microchip. It is programmed with a bootloader.
It has been designed to work with the free
Microchip USB Software. It has
33 user programmable I/O ports, ADC inputs, PWM outputs and more. Power can be provided by the USB bus,
or an external power supply.
For details, click here.
|
|
Our 5V MicroX product range
consists of modular PIC based single board computers(SBC) and
expansion boards. This highly modular design allows you to quickly and economically realize your
microcontroller based project by combining different boards.
More Information........
|
|
Our mixed 3.3V/5V Presto product range
consists of modular PIC based single board computers(SBC) and
expansion boards. This includes the very modular
iMod Modules allowing highly customizable solutions at an economical
price. Details on iMod modules here.
|
|
Prototyping is made easy by combining a
prototype board with a
single board computer(SBC). The advantages are
that the two boards are separate, and if a new prototype is required, the SBC can be plugged onto a new prototyping board.
Enclosures are available for the
PT10E-ASM and
PT24E-ASM boards.
|
|
|
|
Our products are designed to be very modular, which enables easy customization at an affordable price!
Custom solutions are often possible combining existing product with a small custom add-on board.
For example, a custom I/O board controlled via Ethernet can be implemented using a standard
SBC65EC board with a modified
version of our
PT24E-ASM (with custom I/O), and
can be mounted in an enclosure.
|
|
We stock a large range of
Serial (I2C/SPI)
and
Standard Character and Graphic LCD modules, ready for worldwide shipping at discount prices!
|
|
We are expanding our range of
Terminal Block Connectors.
Our range of
Pluggable
Terminal Blocks include
3.5 and
3.81mm headers, and
3.5 and
3.81mm plugs.
Our range of
PCB Mount
Terminal Blocks include
2.54,
3.5,
3.81,
5.00,
5.08mm connector.
|
|
We stock many genuine Microchip
Programmers and Debuggers
|
|
We have a large range of
PIC12,
PIC14,
PIC16,
and
PIC18
PIC Microcontrollers in stock. Place your online order now and have them shipped anywhere
in the world for only USD3.00!
|
|
|
|
Previous News |
• 2 June 2013 - Added the
SBC66UAL
Single Board Computer with USB Host and iMod Ports. Can be controlled via Android phone or Tablet.
• 21 September 2012 - Added a couple of new
Prototyping Boards
to our Netcruzer range of products.
• 21 September 2012 - Added
Hardware and
Enclosures
to our Netcruzer range of products.
• 19 September 2012 - Added the
SBC66ECL
Single Board Computer with Ethernet and USB to our Netcruzer range of products.
• 6 July 2012 - New version of
Firmware for
SBC66EC
available, with support for writing to LCD2S serial LCD displays. See
Forum for details.
• 5 July 2012 - Our new
SBC66EC boards will be
back in stock from next week again.
• 30 May 2012 - Launched
new website for
SBC66EC and future SBC66 boards,
now called Netcruzer range. New site also includes
new firmware and
documentation.
Added
USB Bootloader
for
upgrading firmware,
USB Terminal for debugging and communicating with
board, and ability to
update web pages and firmware via the web server.
• 4 May 2012 - Added the
PT02TC
prototype board specially designed for the SBC66 range of boards, like the
SBC66EC and future SBC66 boards.
• 24 October 2011 - We have received the first batch of SBC66ECL boards, a new low
cost version of the SBC66EC
board. Will sell for USD55 to USD39.95 depending on quantity. Will soon be adding it to our online shop.
• 24 October 2011 - We are currently sold out of all LCD2S products, and will get new stock in
about 2-3 weeks time (latest middle October). Please note that any orders for LCD2S related products received now
(LCD2S-204, LCD2S-162BIY, LCD2S-204YHY, ...), will ONLY SHIP in October when we get new stock!
• 24 March 2011 - New
SBC66EC
board with 10/100 Mbit/sec Ethernet and USB port is now available.
• 4 March 2011 - TNT International Express has been added as a shipping method. This is a
Door-to-Door service, which will make it much easier for customers in countries with complex customs procedures (Europe, South America).
TNT will do all customs paper work for you, and deliver the parcel to your door for as low as $25! For details
click here.
• 2 March 2011 - Added new CAN Bus Driver board for our range of MicroX board. For details, see
MXD1CAN
product page.
• 24 February 2011 - First of two new 10/100 Mbit/sec Ethernet board (with Micro USB)
has gone into production. For details
see our forum.
• 11 October 2010 - Check out our current special on
SBC28PC-IR2,
SBC28PC-IR4
and
MXD2R boards!
• 28 May 2010 - Added range of
PD216LCD
LCD Daughter boards with buttons, LEDs and buzzer.
• 4 January 2010 - We are open again after the Christmas and New Year holiday.
All orders received during this time will be shipped this week. Due to backlog, new orders might not
ship within normal 1-2 days lead time. Will be fully staffed and back to normal next week.
• 4 August 2009 - Released V1.4 of
DEVKIT44B
Development Kit - new features, and uses latest version of MPLAB and HI-TECH Free C Compiler.
• 16 June 2009 - Ported the new Microchip TCP/IP stack to work with our
SBC83I
board. For details,
see our forum.
• 5 June 2009 - Released new firmware V1.40 for
Serial SPI/I2C LCD Daughter Board.
Added "Configure Device" command for configuring device with single command at power up.
• 29 May 2009 - Released SBC65EC V3.10 firmware, supporting IOR5E and MXD2R I/O boards,
and configurable to send UDP events. New Firmware
here, documentation
here, details on IOR5E integration
here, and MXD2R integration
here.
• 23 March 2009 - Added the
SBC83I,
a powerfull SBC board using the PIC18F87J11, and running at 48MHz. It has a 3.3V Switch Mode power supply,
64KBit EEPROM, 4MByte Flash, 32KByte SRAM, RTC with SuperCap and much more.
• 20 March 2009 - Added the
SBC83IL,
a new very powerful, yet low cost 3.3V SBC board using the PIC18F87J11, and running at 48MHz.
• 17 March 2009 - Added new 3.3V SBC boards with RS-232, RS-485 and 1-Wire ports, for details see
SBC83IL-D485M,
SBC83IL-D232, and
SBC83IL-1W28.
• 16 March 2009 - Added many new
prototyping boards
for our Presto range of
SBC Main Boards.
• 24 February 2009 - The new SBC83I and SBC83IL boards have arrived, and will replace the
current SBC83I-J10 and SBC83I-J11 boards (are compatible). Remaining stock
discounted by 50%!
• 9 February 2009 - Added the
Microchip ICD 3
In-Circuit Debugger to our product list. The
PICKit 2 programmers
are also in stock again.
• 14 October 2008 - Second Beta release of V3.10 firmware for SBC65EC now available. For details, see
forum.
• 26 September 2008 - Added many new
Terminal Block Connectors
to our product range.
• 19 September 2008 - Added the
in485P and
in485P-M
RS-485 Interface Module with Terminal Block connector to our Presto iMod product range.
• 12 September 2008 - New V3.10 Beta firmware for SBC65EC has been placed on our server. For details, see
forum.
• 11 September 2008 - We have bought a new business premises, and are
currently in the process of fitting it out, and will soon be moving in. It has much more space,
and we will be adding many more products! All orders will be processed as normal during this time.
• 2 July 2008 - Added new
16MBit
and
32MBit
serial Flash,
256kBit
serial SRAM,
and
EEPROM
chips.
• 16 June 2008 - Added new 2x16 and 4x20 line FSTN
LCD displays
to our product range.
• 23 April 2008 - Added the highly anticipated
SBC83I-J10
Single Board Computer with PIC18F87J10 CPU, External FLASH, SRAM, RTC, DC/DC Converter and up to 3
interfaces like Ethernet, RS-232, RS-485, 1-Wire and more.
• 15 April 2008 -
SBC65EC
and
SBC44UC
boards with Ethernet, USB and RS232 are back in stock and temporarily on special!
• 14 March 2008 - Added the Microchip
PICDEM 2 Plus,
PICDEM 4, and
Explorer 16
Development Boards.
• 12 March 2008 - Added the
in28J60
Ethernet Module with SPI bus and PoE circuitry to our Presto iMod product range.
• 11 March 2008 - Added the
im232M
RS-232 Interface Module with RJ-45 connector to our Presto iMod product range.
• 3 March 2008 - Added the first of the new Presto iMod modules, the
im1WP
1-Wire Interface Module with I2C bus. Also added a cable and adapter to Presto products.
• 4 February 2008 - We have completed development of the first modules to be
released of our new Presto range of Press-Fit Electronic Modules.
These modules are currently in the process of getting manufactured, and will be available in a
couple of weeks time. Small quantities for prototyping are available now on request. For additional
info and photos, see
forum.
• 26 October 2007 - We are currently developing a whole
new range of boards, our Presto Range of Electronic Modules with Press-fit connectors. It consists of
3.3V and 5V boards with Ethernet, PoE, RS232, RS485, CAN Bus, 1 Wire and other interfaces.
Modules feature press-fit connectors, allowing them to be added to the target board
without soldering. For details, see
forum.
• 13 July 2007 - Added
MXD2R
new Relay/Input/Output daughter board.
• 18 June 2007 - Our new
SBC44UC
Single Board Computer with Full Speed USB interface, PIC18F4550 and dual power is now in stock. It is shipped
with a bootloader and example projects. No PIC programmer required!
• 18 May 2007 - Added
150mm
and
300mm Micro Match Cables
, and
12 button
and
16 button matrix keypads.
• 17 May 2007 - Our new
SBC44UC
Single Board Computer with Full Speed USB interface, PIC18F4550 and dual power has gone into production. Expected
availability is end of May.
• 11 May 2007 - Released new version of
Modtronix Network Bootloader.
• 9 May 2007 - Released new version of
Modtronix SBC65EC Web Server
and
Modtronix SBC68EC Web Server.
This new version contains heaps of new features, like UDP commands, controlling PWM outputs and
more configuration options via the web interface.
• 5 February 2007 - Added new range of
3.81mm PCB Mount Terminal Blocks.
• 2 January 2007 - We have moved to a larger premises on the Gold Coast,
for new address see our
contact page.
• 24 November 2006 - Released new range of
I2C/SPI Serial LCD
displays with keypad encoder and user I/Os.
• 16 October 2006 - Released
PGM2KIT
programming adaptor. When used together with the
PICkit 2
programmer it can program any Modtronix PIC based board!
• 10 October 2006 - Released new version of
Modtronix SBC65EC Web Server
and
Modtronix SBC68EC Web Server.
This new version has some minor bug fixes, and implements a DHCP client and NetBIOS, which makes it
very easy to access on a network - no more configuration of static IP addresses are required!
• 21 September 2006 - Released new version of
Modtronix SBC68EC Web Server
and
Modtronix SBC65EC Web Server.
• 20 September 2006 - Released new version of
Modtronix Network Bootloader.
• 13 September 2006 - Added the new Microchip
PICkit 2
low cost USB programmer.
• 1 September 2006 - Added new
SBC board
with RS232 interface for 28 pin PIC chips.
• 13 July 2006 - Added new
LCD displays
to our product range.
• 19 May 2006 - Released two new prototype boards in enclosures. See
PT10E-ASM and
PT24E-ASM
for details.
• 17 May 2006 - Released first boards of new H-Series. All boards
in this series can be used as OEM boards or in enclosures. For details
click here.
• 5 May 2006 - Made a demo SBC65EC web server accessible
via the internet -
click here to view it.
• 21 February 2006 - New version of
SBC65EC
assembled with PIC18F6627 has replaced the old PIC18F6621 version. Firmware
will however continue to support all hardware versions of the SBC65EC!
• 14 February 2006 - Added new
2x16 and 4x20 line LCD Character Modules.
• 20 January 2006 - Released new version of the Modtronix Web Server for the
SBC68EC
with an updated Modtronix TCP/IP stack and network bootloader.
• 15 January 2006 - Released a new version (V3.02) of the Modtronix Web Server for the
SBC65EC.
Also added many TCP/IP example programs, and a new versions of Netloader.
• 21 December 2005 - Released new version of the Modtronix Web Server for the
SBC65EC
with an updated Modtronix TCP/IP stack and network bootloader.
• 19 October 2005 - Added new range of
Active GPS Antennas
with MCX, MMCX and SMA connectors.
|
|
|
|
|
